Features:
v
High efficiency
v Low ripple &Noise
v Output rail Voltage Protection OVP
v Short circuit protection on all output
v Reset table power shut down
v Approve by UL, CAS TUV, NEMKO, CB & CE
v Internal 4cm fan* 2
v 100% burn-in under high ambient temperature (50ºC) vacuum-impregnated
transformer
v MTBF: 100K hours at 25ºC
v 100% Hi-pot tested
v Line input fuse protection
v Active PFC (Power Factor Correction) circuit
v Complies with EN61000-3-2
v AC input full range
Input Characteristics:
v
Voltage: 115/230 VAC
v Input current:
6A maximum / 115 Vrms,
3A maximum / 230 Vrms. |
Specifications:
v
Remote ON/OFF Control: The Power supply shall accept a logic open collector
level which will disable /enable all out put voltage (excluding +5V
standby).
v Temperature range: operating 0º ~50ºC, storage-20º ~ +80ºC
v Temperature coefficient: 0.01% / 0ºC
v Transient response: output voltage recovers in less than 1 ms max.
following a 25%load change
v Hold-up time: 17ms minimum at full load & nominal input voltage
v Humidity: 5~95% RH
v Efficiency: 65% min. at full load
v Power good signal: turn-on delay 100ms to 500ms
v Dielectric withstand: input / output 1800VAC for1 second, input to frame
ground 1800VAC for 1 second
v Overload protection: 150% max.
v Inrush current: 60A cold, 90A ware at 132VAC
v Over voltage protection:
+5V output: 6.82V max.
+3.3V output: 4.5V max.
+12Vdc output: 15.6V max.
v Fan Noise Killer Optional |
